kennametal sn156 p 50mm long venturi nozzle

kennametal sn156 p 50mm long venturi nozzleThe Kennametal SN156 P 50 mm is a long venturi blast nozzle with a BP200 SiAlON liner, polyurethane jacket and 50 mm aluminium thread. The BP200 SiAlON liner combines a relatively low weight with good wear resistance. The material offers better break resistance than silicon carbide and standard silicon nitride. The long venturi shape provides higher blasting capacity than a straight bore nozzle. The SN156 P 50 mm Series is designed for blast hoses

The Kennametal SN156-P 50 mm is a long venturi blast nozzle with a BP200 SiAlON liner, polyurethane jacket and 50 mm aluminium thread.

The BP200 SiAlON liner combines a relatively low weight with good wear resistance. The material offers better break resistance than silicon carbide and standard silicon nitride. The long venturi shape provides higher blasting capacity than a straight bore nozzle.

The SN156-P 50 mm Series is designed for blast hoses with an internal diameter of 25 mm. These nozzles are suitable for applications where reduced weight, a favourable purchase price and broad compatibility are important. The BP200 SiAlON liner offers wear resistance comparable to tungsten carbide when used with standard steel shot, standard steel grit, iron silicate and aluminium silicate.

These nozzles are not recommended for use with hardened steel shot or hardened steel grit. For aluminium oxide or other aggressive abrasives, where longer liner life is important, boron carbide nozzles such as the BLVE 50 mm Series are generally more suitable.

Features

• Long venturi blast nozzle for higher blasting capacity
• BP200 SiAlON liner with relatively low weight and good wear resistance
• Polyurethane jacket and aluminium thread
• 50 mm thread, suitable for most nozzle holders
• Suitable for blast hoses with an internal diameter of 25 mm
• Wear resistance comparable to tungsten carbide with steel shot, steel grit, iron silicate and aluminium silicate
• Better break resistance than silicon carbide and standard silicon nitride
• Not recommended for hardened steel shot or hardened steel grit
• Thread: 50 mm aluminium

Available Sizes and Lengths
Available in bore sizes #3, #4, #5, #6, #7 and #8. Lengths range from 106 mm to 229 mm.