Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
BetaFPV F4 1S AIO SPI FrSky D16 FCC Brushless Flight Controller (Built in VTX)Are you looking to buy a BetaFPV F4 1S AIO SPI FrSky D16 FCC Brushless Flight Controller in Australia? F4 1S AIO FC(SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3. 92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad! PLEASE NOTE: ONLY THE PNP VARIANT SUPPORTS 2S. F4 1S AIO FC(No Rx) integrates 3 components as F411 FC,
Are you looking to buy a BetaFPV F4 1S AIO SPI FrSky D16 FCC Brushless Flight Controller in Australia?
F4 1S AIO FC(SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3.92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad!
PLEASE NOTE: ONLY THE PNP VARIANT SUPPORTS 2S.
PLEASE NOTE: ONLY THE PNP VARIANT SUPPORTS 2S.
F4 1S AIO FC(No Rx) integrates 3 components as F411 FC, 5A ESC and 25mW VTX. It supports external receivers like TBS Crossfire, Frsky XM+ and Spectrum DSMX etc. Meanwhile, this version can handle the 2S power system.
- Integrated with a 25mW VTX, this AIO board(Frsky/Futaba Rx) is ultralight only 3.92g, which can extremely save the weight of building drone, perfectly suitable for the 1S weight-sensitive drone such as Meteor65 HD and HX100 SE.
- F4 1S AIO FC(No Rx) not only integrates with the 25mW VTX but also supports a 1-2S power system, which is perfectly suitable for the weight-sensitive drone such as Meteor75 and Beta85 Pro2.
- This AIO board also reserves a Plug & Play port for the C01 Camera, C01 Pro Camera and BETAFPV Nano HD Camera, no soldering work needed, super convenient for installation.
- Specially added with 2 RGB LED indicators, this board brings the drone an incredible light effect while pilots flying on the night.
- This board can handle 5A continuous current(6A burst), supports the 1S lipo battery, brings the drone a stronger flight performance.
- Come with a BT2.0 connector, it solves the problem of voltage sag, the discharge can be more efficient, which brings this board a better performance on function for power and responsiveness.
Specification of F4 1S AIO FC(SPI Rx)
- Item: F4 1S AIO FC(Frsky/Futaba Rx)
- Weight: 3.92g(without antenna and BT2.0 connector)
- VTX Power: 25mW
- CPU: STM32F411CEU6 (100MHZ )
- Six-Axis: MPU6000 (SPI connection)
- Firmware version: betaflight_4.2.0_STM32F411
- Receiver: Support Frsky Receiver/ Futaba Receiver
- Motor Pin Connecter: 1.25mm Header Pins
- Mounting hole size: 29mm x 29mm / suitable for almost all kind of whoop frame
Specification of ESC
- Built-in ESC with 5A continuous and peak 6A current
- Input voltage: 1S Lipo
- ESC firmware: O_H_5_REV16_8.HEX
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
- Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM
- 4 Indicators: Receiver indicator (Blue)/Flight control status indicator (Green)/Flight control power indicator (Red)/VTX indicator (Pink)
Diagram for F4 1S AIO FC(SPI Rx)
SPI Receiver CC2500
Come with the build-in SPI Receiver CC2500, F4 1S AIO FC(SPI Rx) can compatible with Futaba S-FHSS, Frsky D8 and D16 protocol. The default Frksy protocol is Frsky D16, if pilots buy the wrong receiver of the SPI Frsky version or upgrade the wrong firmware accidentally, which needs to switch the protocol to Futaba or FrskyD8, please upgrade the Betaflight Firmware according to this tutorial.
Package
- 1 * F4 1S AIO Brushless Flight Controller
- 4 * M1.2x4mm Screws
- 4 * M1.4x5mm Screws
- 4 * Anti-vibration Rubber dampers
Browse more
- Browse all AIO Flight Controllers
- Browse all F4 Flight Controllers
- Browse all Flight Controllers
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 104 reviews
Sort
Product Reviews
★★★★★ 5
The Best!
This thing is amazing! Worked right out of the box. No drivers to install, no confusion, just plug and go. I'm using this hub to connect a mouse, a keyboard, and a monitor to my 2025 MacBook Air (M4).
Before buying this I bought a complicated, powered hub for 2x the price and wasted multiple hours trying to get the $%^&(*& thing to work, which it never did. If you want to run a display and a few peripherals, this Startech hub is the absolute best bang for your buck.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
★★★★★ 1
Quality Control Issues
I want to like this dock, I really do. I purchased it with the intention of using it as a hub for my phone + usb-c external display.
The pass-through charging never worked on this dock. Tried multiple cords and tested the dock with nothing plugged into any of the USB ports -- all of the power disappears somewhere onto the hub and the actual charge rate on my phone slows to a trickle. With nothing connected, it estimates >24hrs to charge from 30% to full.
The plus side is that the usb ports do work, though the usb-c display went from 100% reliability to <50% within a few months of purchase. Extremely frustrating.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 24, 2024
★★★★★ 5
This is the one, buy it for DeX!
Looking for a compact USB hub to connect your laptop or Samsung DeX capable device? Buy this one!
I've tried multiple similar items from name brands, and they work fine as a USB and port hub, but this one is able to support power delivery and display data through a single (capable) USB-c cable. I assume because it is noted to be capable of some combo of USB 3.2, PD 3.0 pass through and DP 1.4 alt mode. I'm not quite sure which one(s) make it possible, but it works for an HP Spectre laptop and Galaxy phone.
Only improvement suggestion is to add an additional 10gb capable USB-C port in place of the three USB-A ports, but that's being super picky.
Thanks StarTech for building another unique solution for connectivity challenges.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2025
★★★★★ 2
Usb-c passthrough started failing about a year into ownership.
This had the potential to be the perfect accessory for my M4 MacBook Air. It is very difficult to find dongles like this that support display passthrough via usb-c (meaning that if you have a usb-c display you can connect it to this and use the display). When it did work, I was able to power a triple monitor setup with my 2 port Macbook Air (with one display being driven by a displaylink adapter).
If this product had continued to work as advertised, is would be a 5 star review.
But after maybe a year of VERY sporadic use (I use this maybe once a week because my MacBook Air is not often docked) the usb-c passthrough is already failing. On a display I use every day with a different machine (a 16" MBP that has enough ports to not need any adapters) and the display and cable work perfectly fine there so I can only assume that it is this specific adapter which is failing. If I insert the connector several times, sometimes I can get it to work but my success rate just keeps dropping. There was no other reason to spend this much on an adapter that without usb-c passthrough offers just 3 usb-a ports like most much cheaper adapters. So to say I am disappointed is an understatement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
★★★★★ 4
Expensive, but it works
The good parts:
Yup, this works with DP alt mode, single cable use works for most devices I tried (steam deck, laptop, odin mini 2) even without the hub powered through the power in on the hub, I even got it working without external power to either the hub or my small usb-c monitor. However, some devices like my phone likely didn't give enough power for it to work without another power source. On my phone it worked for some usb devices without external power, but the dp alt mode didn't do work. DP alt on my phone works just fine with external power connected to the hub. Powering it with a small but powerful power bank worked fine, but lower power power banks might not keep up especially if the monitor isn't getting it's own power. It only takes a watt or two of power for the hub itself from some quick and dirty measurements charging my laptop through the pd-in on the hub.
As for the rest of it, the three usb 3 ports means you should be enough to get by for any use case, though you may need more dongles or adapters to get the type of connections you need, but quite usable as-is for a lot of purposes.
Basically it does what it says, there really is no other hub currently that can do pd alt mode, only big docks which need power supplies.
The ok parts:
*When it isn't powered* I noticed that with a monitor already plugged in, plugging it into a device would lead to the monitor not being initialized. But plugging the hub into the device first before connecting the monitor worked. No issue when it was powered. You can use this to get display out and charge with a Nintendo switch, but if it's not powered through the pd-in it probably wont switch to TV mode and output video, not sure if that's because of power or software reasons.
This is a nitpick, but if you care about the feel or aesthetic it's noticeably bland. The case is plastic and there seems to be no weighting on the inside, it's very light, which can feel cheap but it's not like adding weights would functionally make it better, the case also has a bit of a harsh feeling where it's joined, but it does feel solid and durable enough. It's clearly function over form, just barely meets the minimum bar imo.
The bad part:
You already saw, but the price is a bit steep for a hub (at $80). I'd love to see it at 60 or even 40 instead, I hope more similar hubs pop up for competition.
In summary:
It does what it says, if you know you want this and what it is then get it, I feel like it shouldn't cost this much, but it's quite usable and for now it's the only option for a DP alt mode hub.
Minus a half star each for subpar presentation and price 4/5
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 4, 2024
recommand products
Icleandic Borealis
169.99
Cat's Meow Portrait
52.40
2 Pcs Halloween Retro Headbands Woman Headbands With Bows Cotton Handmade Hairbands Vintage Wire Headband Rabbit Ear Bow Hair Ba
14.56
Westie Lab Mix
52.40
Lativ Red Wig With Bangs Long Red Wigs For Women 26 Inches Curly Wavy Hair Natural Looking Heat Resistant Fiber Wig For Girls Ha
36.70