FMS J-10 64mm TrueFire LED Afterburner
SKU: 83176958528

FMS J-10 64mm TrueFire LED Afterburner

$35.06 $38.95
Save 10%
No.2 Bestseller on omaxtrans.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

FMS J-10 64mm TrueFire LED AfterburnerPN 64OUT V2 Afterburner mount works with the stock FMS 64mm outrunner (PN 2840 KV3150) motor. Options Select A Fire TrueFire Random flickering from 30% to 50% throttle to simulate the afterburner lighting turning on. From 50% throttle to 100% throttle the afterburner gets brighter with full brightness at 100% throttle. Select A Fire adds the ability to adjust the throttle position where the main Orange LED turns on. The ability to turn on and off the

PN 64OUT-V2

Afterburner mount works with the stock FMS 64mm outrunner (PN 2840-KV3150) motor.

Options

Select-A-Fire TrueFire - Random flickering from 30% to 50% throttle to simulate the afterburner lighting/turning on. From 50% throttle to 100% throttle the afterburner gets brighter with full brightness at 100% throttle. Select-A-Fire adds the ability to adjust the throttle position where the main Orange LED turns on. The ability to turn on and off the flickering effect is also provided.

No additional radio (TX) programming is required for the realistic afterburner effect. This is a plug and play system. 

Includes a 3D printed motor mount, 20" extension wiring from controller to LED, connection to a 4S battery balance port and receiver. 

An integrated Y cable is provided with the controller to split the throttle signal from the receiver (RX) and provide it to the afterburner controller and the ESC. 

The controller itself weighs 18g. 

Afterburner mount with LEDs weighs 21g. 

The dimension listed is for the outside diameter of the motor. See photos for more information. Installation instructions:

Installation instructions:

1) Remove the motor per the manual instructions. 

2) Position the afterburner mount to the EDF assembly. You will need to glue the afterburner mount to the EDF assembly. Make sure that there is sufficient clearance between the motor and the afterburner mount. 

3) In order to place the motor and afterburner in the fuselage you will need to remove foam from the fuselage. See the pictures for more information. 

4) Route the LED wire to the battery compartment.

5) Connect the LED wire to the Flicker LED controller.

6) Connect the ESC lead to the Y splitter. One end goes to the receiver throttle port and one to the Flicker LED controller Throttle connection. 

7) Connect the Flicker LED controller Battery connector to the balance lead of the battery. 

8) Power on the plane and the transmitter. Make sure your plane is secure prior to adding throttle input. Give it throttle and enjoy the Flicker! It gets really good around 30% throttle input. 


 

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 83176958528

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 2109 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Ryan Y.
Phoenix, US
★★★★★ 5
Heavy-Duty Solution for Large Towers — Rock Solid
This CPU holder is exactly what I needed to reclaim my desktop workspace. I wanted to get the computer off the desk to clear up room for projects, but I didn't want to put it on the floor where it’s susceptible to static and pet hair. This mount keeps the tower tucked away under the desk but still within easy reach. Build Quality & Weight: The unit is impressively well-built with sturdy steel. While the specs state it can hold up to 44 lbs, my current build is closer to 20 lbs, and it handles it with zero flex or wobble. It feels very secure once locked in. Design & Airflow: One of the best benefits I’ve noticed is the noise reduction. Having the case mounted under the desk surface helps shield the sound of the fans, creating a quieter workspace. The open-frame design is also great for airflow and keeps all the ports easily accessible. It’s highly adjustable (width 7.7” to 11.8” and height 20” to 25.8”), so it should fit almost any full-size case. Installation Tip: Installation was straightforward, though I’d recommend measuring your desk thickness first to ensure it can support the weight. If you’re looking for a solid, full-size PC holder to keep your system off the floor, this is a great choice. It feels like a professional-grade mount that will last through several different builds.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 7, 2026
R
Richard
Battle Creek, US
★★★★★ 4
Great way to keep your PC off the floor, especially with a standing desk
This mount is a great solution if you want to get your desktop tower off the floor and clean up the space around your desk. The construction feels very solid and once installed it holds the PC securely without any wobble. I like that the frame is adjustable so it can fit different case sizes, and the open design allows for good airflow while still supporting the case well. It is especially helpful if you have a standing desk. Keeping the tower mounted under the desk means all of the cables move with the desk when it raises or lowers, which makes everything much cleaner and easier to manage. Installation takes a little planning to line things up correctly, but once it is mounted it feels very secure. If you want a cleaner workspace and a better setup for a standing desk, this mount works really well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 14, 2026
V
Viner369
Los Angeles, US
★★★★★ 5
Built Like a Tank… Maybe Too Big
This thing is solid. The build quality is exactly what you want when you’re hanging a PC under a desk—sturdy steel, secure mounting, and plenty of adjustability to fit larger cases. It definitely does its job of getting your tower off the floor and out of the way. That said, size matters here—and this is built for big cases. If your setup is more compact, it is overkill. Definitely measure before you commit, because while the adjustability is nice, it’s clearly designed with larger towers in mind. Pros: Very sturdy, confidence-inspiring build Adjustable to fit a wide range of larger PC cases Keeps PC off the floor (less dust, more space) Can mount under desk or on wall Cons: Oversized for smaller or mid-sized builds Requires careful measuring before install Bulkier than some alternative mounts Bottom Line: A heavy-duty mount that does exactly what it promises—just make sure your PC actually needs something this big before you commit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
J
Justin P.
West Palm Beach, US
★★★★★ 5
My god
Build Quality The steel construction is very solid and feels durable enough to support a desktop tower or similar device. The powder-coated finish also helps protect against scratches. Comfort / Ergonomics Mounting a PC under the desk helps free up floor space and improves overall desk organization. It also keeps the computer elevated away from dust and improves airflow. Features The adjustable frame allows it to fit a variety of PC sizes, which makes it versatile. The mounting brackets feel strong and secure once installed. Ease of Use / Installation Installation requires basic tools but is fairly simple. Once mounted, the adjustable brackets make it easy to secure the computer in place. Cleaning / Maintenance Keeping the PC off the floor makes cleaning around your desk easier and helps reduce dust buildup in the computer itself. Overall Impression This mount is a great solution for anyone wanting a cleaner desk setup. It’s sturdy, adjustable, and keeps your computer safely mounted under the desk. Excellent for improving workspace organization.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 13, 2026
J
Ja
Lake Worth, US
★★★★★ 5
Rock Solid and Computer / Wall Safe! Last PC Mount you'll ever need.
This is the hardware that you want in your office: robust, no-nonsense, and able to boss you around its workload. I installed a full size PC case/server in it, and it is rock solid once you lock it in. The open-frame design also merits a mention here as it greatly improves airflow and allows you to access ports on the motherboards and other hardware on your rig should you want to during your gaming sessions without bringing too much heat inside and causing headaches. The width of the holder can be adjusted (approximately 7.7” through 11.8”) in width and (approximately 20” through 25.8”) in height so it fits a large variety of towers, so you don't have to worry whether it could fit your set-up or not. Smaller towers may have substantially more wiggle room though. The mount's weight limit is no joke—up to 44 lbs—so you're not sacrificing stability just to save a few bucks. The shells are quite secure, although some people may have wished for a little more tightening bite; they still prevent your equipment from falling off if you accidentally bump on a wall, which is more important than you may think. A little nitpick: the lower wall-mount bracket could have a couple of extra pilot holes to reduce twisting over time. Not a breaker, just a heads-up for all of you who are looking to the long term. Altogether, it's a reliable, solid fix that is well worth the cost, particularly if you're cramming space and airflow in a tight configuration.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 27, 2025

recommand products

Charm - Big light blue fish goldplated
66.00
Charm - Blue jellyfish goldplated
54.95
Angel 4 split pearl gold coloured
134.95
Ring twin elegance purple goldplated
128.00
Charm letter round cc silver
104.50