Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Josue - warme gewatteerde donsjas met een dikke opstaande kraag en ritssluiting over de hele lengteMaak kennis met de Josue donsjas! Jouw ideale metgezel voor de koudere maanden Met zijn gewatteerde ontwerp en dikke opstaande kraag biedt deze jas optimale warmte en comfort, perfect voor zowel stedelijke avonturen als buitenactiviteiten. De ritssluiting over de hele lengte en het moderne silhouet maken deze jas niet alleen functioneel, maar ook stijlvol. Voeg de Josue toe aan je garderobe en blijf warm zonder in te boeten op stijl. Details: Regular
Maak kennis met de Josue donsjas!
Jouw ideale metgezel voor de koudere maanden Met zijn gewatteerde ontwerp en dikke opstaande kraag biedt deze jas optimale warmte en comfort, perfect voor zowel stedelijke avonturen als buitenactiviteiten.
De ritssluiting over de hele lengte en het moderne silhouet maken deze jas niet alleen functioneel, maar ook stijlvol. Voeg de Josue toe aan je garderobe en blijf warm zonder in te boeten op stijl.
Details:
- Regular fit
- Hoogwaardige isolatie
- Handwas aanbevolen
Maattabel (cm)
| Maat | Borst | Lengte | Mouw |
|---|---|---|---|
| M | 100 | 72 | 65 |
| L | 104 | 74 | 66 |
| XL | 108 | 76 | 67 |
| 2XL | 112 | 78 | 68 |
| 3XL | 116 | 80 | 69 |
| 4XL | 120 | 82 | 70 |
| 5XL | 124 | 84 | 71 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 340 reviews
Sort
Product Reviews
★★★★★ 3
Generally happy
Style: Tech Pack 28 sqft, Style: Tech Pack 28 sqft
Much thinner than I expected, but installation went better than I'd thought it would. Needed to line the interior of the engine cover of a Ford E450 RV. Tried nitrile gloves, but they stuck to the material so did it bare handed. Cut easily with a fresh razor blade. Pressed in place with a plastic putty knife. We'll see the effectiveness on the next trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 3, 2025
★★★★★ 5
Makes For Quiet Rides
Model: 10 SqFt(0.95 SqM)
Comparable quality and performance to name brand competitor. It sticks on strong, easy to apply, and does make a difference in sound reduction. Turn your hollow shell sounding vehicle panels into solid sounding walls.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 15, 2026
★★★★★ 5
Must for subwoofers. True 2mm spec. High quality.
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
Let me start of by saying WOW! This made a huge difference in the SQ of my L7S pushing 930w rms. Before I had major rattles in my 2020 Honda Civic SI. Taking the time to do this to my trunk and Lid made me realize just how loud my subwoofer actually is. It literally eliminated the rattles throughout my whole car. I still plan on doing this to my doors and rear deck but once I upgrade the speakers. I still have half of the box just doing the trunk and lid so 1 box of 36sf will be enough for most of the areas that need to get done. You may need a little more overall. This is true 2mm spec. Very sticky and easy to apply. It just take time to finish the work correctly and roll it down. It is not as heavy as I thought it was going to be. The size of the sheets are perfect for what you need to do. The value is on point for the quality. It does not rip very easily but you can cut it to size without any problems. Again, This is a must buy for anyone who is pushing 1000w rms or more.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2025
★★★★★ 5
Quality product you
Model: 18 SqFt(1.7 SqM), Model: 18 SqFt(1.7 SqM)
Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2026
★★★★★ 5
Good stuff !
Model: 36 SqFt(3.4 SqM), Model: 36 SqFt(3.4 SqM)
This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great.
This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over.
It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement.
It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way.
Get it. Use it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
recommand products
Prissmacer, Ess. Droit/ess. Rlv. Legno - Snow, Matt, 33.3x55cm, 8.80mm, Rett.
28.52
Sonny - Moderne Wanddecoratie | Artprint, Glass Art & Wandkleed
39.95
Eettafel Deens Ovaal | Celine Wood
1201.50
Prissmacer, Ess. Denali/ess. Shasta - Ess. Denali Store, Matt, 16.3x51.7cm, 14.00mm, Rett.
21.20
Prissmacer, Ess. Oxid - Dark, Matt, 30x90cm, 10.50mm, Rett.
19.44