Solar Technology 60W Rigid Solar Panel L Brackets & 15A MPPT
SKU: 40400554269

Solar Technology 60W Rigid Solar Panel L Brackets & 15A MPPT

$142.17 $157.97
Save 10%
No.2 Bestseller on omaxtrans.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Solar Technology 60W Rigid Solar Panel L Brackets & 15A MPPTPower: 60W Size: 670 x 640 x 35mm Weight: 4. 5Kg Amp hours per day: 20. 94A Charge controller: Includes 15A Dual Battery MPPT Charge Controller Vmp: 17. 5V Voc: 22V Isc: 3. 97A Includes Universal Aluminium L Brackets with Fixings This 60w PV Logic solar panel roof and deck top kit enables the solar panel to be professionally fitted to the roof of a caravan motorhome yacht or narrow boat. The 60w PV Logic solar panel is often a standard fit for caravan

  • Power: 60W
  • Size: 670 x 640 x 35mm
  • Weight: 4.5Kg
  • Amp hours per day: 20.94A
  • Charge controller: Includes 15A Dual Battery MPPT Charge Controller
  • Vmp: 17.5V
  • Voc: 22V
  • Isc: 3.97A
  • Includes Universal Aluminium L Brackets with Fixings

This 60w PV Logic solar panel roof and deck top kit enables the solar panel to be professionally fitted to the roof of a caravan motorhome yacht or narrow boat. The 60w PV Logic solar panel is often a standard fit for caravan and campervan manufacturers alike. Delivering up to 390wh per day the panel benefits from a 10 year product warranty and is suitable for powering most DC and some AC appliances via a separately purchased inverter. This roof and deck top kit is supplied with a 60w PV Logic solar panel our premium aero brackets 10Ah dual battery charge controller 4m cable connectors fuse bonding agent cable feed gland and detailed installation instructions.

Developed to meet higher energy demands the 60W rigid solar panel is suitable for powering higher power consumption devices including 12V TVs and 240V appliances (when used with an inverter). It also provides a continuous trickle feed maintain and extending the life of any 12V battery. The six layer construction of each panel delivers performance and strength.

The panel includes bypass diodes to minimise the effect of shadows and is supplied with all a 5m cable connectors and detailed installation instructions for permanent fitting. This panel can be installed using standard aluminium premium PVU or aero aluminium brackets.

PV Logic rigid solar panels have a 10-year frame integrity warranty and a 20-year cell warranty (cell performance warranty states that at 20 years the cell output will be no less than 80% of new
performance values - i.e. the cell degradation rate will be no greater than 20% in 20 years).

Includes Universal Aluminium L Brackets

A simple low cost way to fix a solar panel to a motor home or boat. Simply fix to the frame of the solar panel with the stainless steel screws supplied and then the lower surface bonds to the roof using SIKA Flex 252 or similar

Includes 15A Dual Battery MPPT Charge Controller

The PV Logic MPPT Pro charge controller has been designed to deliver the highest possible power from any 12v or 24v solar panel into a 12v or 24v battery.

The MPPT Pro provides protection for a battery against overcharging for any solar panel or solar array up to 225w and is either an excellent choice for new installations or as an upgrade to an existing solar systems. Whether for leisure (caravan motorhome boat) industrial or solar off grid systems the MPPT Pro will more than pay back its cost through the extra power it delivers.

  • Reverse current protection.
  • Unique dual battery charging function.
  • Efficient MPPT charging increases battery lifetime and improves solar system performance upto 20%.
  • 12/24V automatic recognition.
  • Overload protection
  • Open circuit protection
  • Lightning surge protection
  • Deep discharge protection
  • Charge current protection up to 15A
  • Bluetooth with Apple and Android apps available
  • Optional Display unit available
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 40400554269

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 736 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
Pure C.
Lexington, US
★★★★★ 4
Short
Size: 8 cube
Little bit shorter than what I thought it would be but it was not hard to put together and I like it
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
T
The Wachiras
Grantham, US
★★★★★ 5
Nice entry way table
Size: 8 cube, Size: 8 cube
Great-looking 8 cube organizer with a really nice finish. The color is beautiful, and the top has a slightly matte stain that gives it a clean, modern look without being too shiny. Assembly does take two people at certain points, as you’ll need someone to hold pieces in place while aligning and securing them. Not difficult overall, just easier with an extra set of hands. It’s a bit shorter than a typical entry table, but the width is great and it offers plenty of storage space. Perfect for organizing baskets, shoes, or everyday items while still looking stylish.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
Z
Verified Purchase
zeel
Charlottesville, US
★★★★★ 5
Anyone with multiple monitors should buy this
I have been wanting something like this for years. I use three monitors, and keeping them all aligned is impossible. I've considered using tape, but that seems like it would lead to a sticky mess and it would never hold well. I imagined some solution with magnets, but never came up with anything that I thought I could implement myself. As soon as I saw this product, I was ordered two sets. I knew that this was either going to be a revolution, or a huge disappointment. It was not a disappointment. Installation is simple as can be, clean off your monitor back with some alcohol wipes (they should consider including some, would be a nice touch). For my screens, alignment was super easy because they have really square corners so I just stuck my aligners right at the corners and it worked great. For a screen with a curved back or something more geometric you probably want to get the screens in place first, then stick both parts at the same time. Either way, they stuck really well and the pads are flexible so they would work on a curved back just as well as flat. The brackets also have a locking part that allows you to slide them side to side a bit giving you more flexibility in mounting, and then you can lock them down once everything is lined up so they hold nice and firm. I also managed to screw up and put the wrong part on the wrong side, but luckily if you unlock the bracket you can slide the main part off of the adhesive part completely, so I was able to simply swap the two main parts without needing to peel the adhesive part off. It's a well thought out design and I was impressed by just how much flexibility there was in the mounting solution while still allowing for a very easy installation and rigid final setup. The magnets are strong, strong enough that if I needed to move a monitor regularly it would actually be annoying because while you can definitely take these apart they hold way too well to be doing so all the time. These are clearly intended for a permanent installation, without making it overly difficult to take things apart if you have to. If you have to turn a screen often though, such as to show something to a client or make the screen visible from another area of the room, I'm not sure if these will be what you need as they don't just come apart easily. If you want your screens to stay where you put them though, they are awesome! For me, these were perfect, and based on the design I think they should work well for most monitors and most setups. I'm so glad this product exists, it was well worth the money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 10, 2025
J
Verified Purchase
Jimmy Mitchelll
Lowell, US
★★★★★ 5
Great product!!!
I feel the price is a little high, but the product is amazing! Works just as described!!! I will be purchasing another set for the bottom of my work monitors. Currently their is just 1 set keeping these level.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
R
Verified Purchase
Ryan's Reviews
Whiting, US
★★★★★ 5
I'd give 10 stars if I could
Holy cow! This is it! For YEARS I've been looking for a product that would align the bezels on my monitors. I found this product by scrolling through reels and then found the link to Amazon. The price was steep and I was hesitant, but I took the gamble and I'm so glad I did. Installation is slightly confusing, and you really want to know how this works before you adhere it to any surface. I'll break it down for you: Align your monitors flat next to each other. Attach one side with the adhesive, then snap the other side on with the magnet. Peel that adhesive strip and lay it on your second monitor so that they are even. Repeat for the bottom. Twist the U shape up for the left, down for the right. Adjust your angle and then lock them by putting the U shape back to how it was. That's it. The stability on these simple magnets is excellent. I went from a wobbly mount to locked in and only moving when I want it to. I'm so happy this product exists. That's German engineering for you. 💪💪
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026

recommand products

Eibach 11-16 Ram 1500 Front Pro-Truck Shock
163.03
Eibach Pro-Alignment Front Kit for 03-09 Toyota 4Runner / 07-09 Toyota FJ Cruiser
355.09
Exhaust Gas Recirculation (EGR) Transducer Standard Motor Parts VG310
271.15
Direct Injection High Pressure Fuel Pump Standard Motor Parts GDP739
355.33
crp-09083 1936 Italian Police on armored motorcycles and sidecar turret cool crp-09083
169.00